Transient Analysis Of Electric Power Circuits Handbook

Every now and then, a good book comes along and quite rightfully makes itself a distinguished place amongthe existing books of the electric power engineering literature. This book by Professor Arieh Shenkman is one of them. Today, there are many excellent textbooks dealing with topics in power systems. Some of them are considered to be classics. However, many of them do not particularly address, nor concentrate on, topics dealing with transient analysis of electrical power systems. Many of the fundamental facts concerning the transient behavior of electric circuits were well explored by Steinmetz and other early pioneers of electrical power engineering. Among others, Electrical Transients in Power Systems by Allan Greenwood is worth mentioning. Even though basic knowledge of tr- sients may not have advanced in recent years at the same rate as before, there has been a tremendous proliferation in the techniques used to study transients. Theapplicationofcomputerstothestudyoftransientphenomenahasincreased both the knowledge as well as the accuracy of calculations. Furthermore, the importance of transients in power systems is receiving more and more attention in recent years as a result of various blackouts, brownouts, and recent collapses of some large power systems in the United States, and other parts of the world. As electric power consumption grows exponentially due to increasing population, modernization, and industrialization of the so-called third world, this topic will be even more important in the future than it is at the present time.

This book offers a concise introduction to the analysis of electrical transients aimed at students who have completed introductory circuits and freshman calculus courses. While it is written under the assumption that these students are encountering transient electrical circuits for the first time, the mathematical and physical theory is not ‘watered-down.’ That is, the analysis of both lumped and continuous (transmission line) parameter circuits is performed with the use of differential equations (both ordinary and partial) in the time domain, and the Laplace transform. The transform is fully developed in the book for readers who are not assumed to have seen it before. The use of singular time functions (unit step and impulse) is addressed and illustrated through detailed examples. The appearance of paradoxical circuit situations, often ignored in many textbooks (because they are, perhaps, considered ‘difficult’ to explain) is fully embraced as an opportunity to challenge students. In addition, historical commentary is included throughout the book, to combat the misconception that the material in engineering textbooks was found engraved on Biblical stones, rather than painstakingly discovered by people of genius who often went down many wrong paths before finding the right one. MATLAB® is used throughout the book, with simple codes to quickly and easily generate transient response curves.

A hands-on introduction to advanced applications of power system transients with practical examples Transient Analysis of Power Systems: A Practical Approach offers an authoritative guide to the traditional capabilities and the new software and hardware approaches that can be used to carry out transient studies and make possible new and more complex research. The book explores a wide range of topics from an introduction to the subject to a review of the many advanced applications, involving the creation of custom-made models and tools and the application of multicore environments for advanced studies. The authors cover the general aspects of the transient analysis such as modelling guidelines, solution techniques and capabilities of a transient tool. The book also explores the usual application of a transient tool including over-voltages, power quality studies and simulation of power electronics devices. In addition, it contains an introduction to the transient analysis using the ATP. All the studies are supported by practical examples and simulation results. This important book: Summarises modelling guidelines and solution techniques used in transient analysis of power systems Provides a collection of practical examples with a detailed introduction and a discussion of results Includes a collection of case studies that illustrate how a simulation tool can be used for building environments that can be applied to both analysis and design of power systems Offers guidelines for building custom-made models and libraries of modules, supported by some practical examples Facilitates application of a transients tool to fields hardly covered with other time-domain simulation tools Includes a companion website with data (input) files of examples presented, case studies and power point presentations used to support cases studies Written for EMTP users, electrical engineers, Transient Analysis of Power Systems is a hands-on and practical guide to advanced applications of power system transients that includes a range of practical examples.

Covering the fundamentals of electrical transients, this book will equip readers with the skills to recognise and solve transient problems in power networks and components. Starting with the basics of transient electrical circuit theory, and moving on to discuss the effects of power transience in all types of power equipment, van der Sluis provides new insight into this important field. Recent advances in measurement techniques, computer modelling and switchgear development are given comprehensive coverage for the first time. An electromagnetic transients calculation program is included and will prove valuable to both students and engineers in the field.

The study of circuits is the foundation on which most other courses in the electrical engineering curriculum are based. For this reason the first course in circuit analysis must be appropriate to the succeeding specializations, which may be classified into two groups. One is a specialization in electro nics, microelectronics, communications, computers etc. , or so-called low current, low-voltage engineering. The other is in power electronics, power systems, energy conversion devices etc. , or so-called high-current, high voltage engineering. It is evident that although there are many common teaching topics in the basic course of circuit analysis, there are also certain differences. Unfortunately most of the textbooks in this field are written from the 'electronic engineer's viewpoint', i. e. with the emphasis on low current systems. This brought the author to the conclusion that there is a definite disad vantage in not having a more appropriate book for the specializations in high-current, high-voltage engineering. Thus the idea for this book came into being. The major feature distinguishing this book from others on circuit analysis is in delivering the material with a very strong connection to the specializations in the field of power systems, i. e. in high-current and high voltage engineering. The author believes that this emphasis gives the reader more opportunity for a better understanding and practice of the material which is relevant for power system network analysis, and to prepare students for their further specializations.

A bestselling calculations handbook that offers electric power engineers and technicians essential, step-by-step procedures for solving a wide array of electric power problems. This edition introduces a complete electronic book on CD-ROM with over 100 live calculations--90% of the book's calculations. Updated to reflect the new National Electric Code advances in transformer and motors; and the new system design and operating procedures in the electric utility industry prompted by deregulation.

The book, now in its Second Edition, presents the concepts of electrical circuits with easy-to-understand approach based on classroom experience of the authors. It deals with the fundamentals of electric circuits, their components and the mathematical tools used to represent and analyze electrical circuits. This text guides students to analyze and build simple electric circuits. The presentation is very simple to facilitate self-study to the students. A better way to understand the various aspects of electrical circuits is to solve many problems. Keeping this in mind, a large number of solved and unsolved problems have been included. The chapters are arranged logically in a proper sequence so that successive topics build upon earlier topics. Each chapter is supported with necessary illustrations. It serves as a textbook for undergraduate engineering students of multiple disciplines for a course on ‘circuit theory’ or ‘electrical circuit analysis’ offered by major technical universities across the country. SALIENT FEATURES • Difficult topics such as transients, network theorems, two-port networks are presented in a simple manner with numerous examples. • Short questions with answers are provided at the end of every chapter to help the students to understand the basic laws and theorems. • Annotations are given at appropriate places to ensure that the students get the gist of the subject matter clearly. NEW TO THE SECOND EDITION • Incorporates several new solved examples for better understanding of the subject • Includes objective type questions with answers at the end of the chapters • Provides an appendix on ‘Laplace Transforms’

Extracted from the highly successful Foundations of Electrical Engineering by the same author, this book gives a one-semester of electric circuits suitable for majors or nonmajors. Concepts and vocabulary are defined clearly and accurately, key unifying ideas in electric circuits are identified with icons in the margins, and problem solving techniques are presented in the many examples. The book presents basic circuit analysis techniques, first and second-order transient analysis, AC circuit theory, transient and steady state circuit analysis based on complex numbers, and an introduction to electric power systems.