Advances In Ultra Low Emission Control Technologies For Coal Fired Power Plants

Advances in Ultra-low Emission Control Technologies for Coal-Fired Power Plants discusses the emissions standards of dust, SO2, NOx and mercury pollution, also presenting the key technologies available to control emissions in coal-fired power plants. The practical effects of ultra-low emissions projects included help the reader understand related implications in plants. Emphasis is placed on 300MW subcritical, 600MW subcritical, 660MW supercritical and 1000MW ultra-supercritical coal-fired units. The influence of different pollutant control units, such as wet electrostatic precipitator, desulfurization equipment and the electrostatic precipitator are also analyzed, and the pollutant levels before and after retrofitted ultra-low emissions are compared throughout. Provides a unique analysis of advanced technologies, such as dust-removal, desulfurization and denitrification used for ultra-low emissions in coal-fired power plants Introduces emission standards for dust, SO2, NOx and Mercury pollution from coal-fired power plants in China, the US and Europe Provides solutions to reducing emissions based on technological advances in China Analyzes the environmental and economic effects of these technologies

This book presents the evolution toward advanced coal-fired power plants. Advanced power plants with an efficiency level of 45% are today commercially available and even more efficient plants are in their development phase. Considering that presently many pulverized coal-fired power plants operate with an efficiency of about 32%, an improvement of more than 40% specific coal consumption and CO2 discharge can be achieved. Before trying to apply as a secondary measure the use of carbon sequestration, it seems that this 40% specific CO2 discharge reduction as a primary measure can much easier be achieved. The effect of power generation on the environment can be drastically improved by the use of flue gas cleanup systems in advanced pulverized coal-fired power plants (SO2 emission reduction from 40 to 1.4 lb/MWh and NOx emission reduction from 7.5 to 0.64 lb/MWh). With an increased number of coal-fired plants, CO2 discharge and emissions can be reduced, even with an increase of electric power generation in the US by 38% over the next 20 years. Even though the book concentrates on pulverized coal-fired power plants, it also discusses and compares other options like fluidized-bed combustion and coal gasification.

The most abundant energy source in our world is coal. Coal-fired power generation comes with significant costs to environment and human health. The water runoff from coal washeries carries pollution loads of heavy metals that contaminate ground water, rivers, and lakes e thus affecting aquatic flora and fauna. Fly-ash residue and pollutants contaminate soil and are especially harmful to agricultural activities. Most importantly for human health, combustion of coal releases emissions of sulfur dioxide (SO2), nitrogen oxides (NOx), particulate matter (PM), carbon monoxide (CO), volatile organic compounds (VOCs), and various trace metals like mercury, into the air through stacks that can disperse this pollution over large areas. All educated people in the world are worried about the environmental problems caused by coal based power plants. The burning of coal adds mainly to increase acid rain and hence increase air pollution which in turn is a cause of global warming, harm to flora and fauna and damage of property. Environmental regulations for coal-fired power plants in the world cover a comprehensive range of very tedious requirements. New regulations were implemented from 2014 in China, USA and European Union which fixed the `emission limits¿ very low for SO2 , NOx, mercury particulate for coal-fired power generation plants. Now it is the time to evaluate emission control technologies whether the technologies can be helpful in achieving the new lower emission limits. Coal-fired Electricity and Emissions Control covers innovative trends and reviews dealing emissions of carbon dioxide (CO2), sulfur dioxide (SO2), and nitric oxide (NO) from thermal power plants and its control strategy. The analysis shows that aggressive pollution control regulations such as mandating flue gas desulfurization, introduction and tightening of emission standards for all criteria pollutants, and updating procedures for environment impact assessments, are imperative for regional clean air and to reduce health impacts. It presents insights into the coal fired power plants using modern technologies pollute less than firstborn designs due to these new technologies that filter the flue gases in stacks; however various pollutants are still being emitted in several times higher amounts than natural gas based and other power plants.

The U.S. Department of Energy (DOE) was given a mandate in the 1992 Energy Policy Act (EPACT) to pursue strategies in coal technology that promote a more competitive economy, a cleaner environment, and increased energy security. Coal evaluates DOE's performance and recommends priorities in updating its coal program and responding to EPACT. This volume provides a picture of likely future coal use and associated technology requirements through the year 2040. Based on near-, mid-, and long-term scenarios, the committee presents a framework for DOE to use in identifying R&D strategies and in making detailed assessments of specific programs. Coal offers an overview of coal-related programs and recent budget trends and explores principal issues in future U.S. and foreign coal use. The volume evaluates DOE Fossil Energy R&D programs in such key areas as electric power generation and conversion of coal to clean fuels. Coal will be important to energy policymakers, executives in the power industry and related trade associations, environmental organizations, and researchers.

Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.

Advanced Technologies for Solid, Liquid, and Gas Waste Treatment presents the potential of using advanced and emerging technologies to effectively treat waste. This book uniquely addresses treatment techniques for waste in all three phases, solid, liquid, and gas, with the goals of mitigating negative impacts of waste and producing valued-added products, such as biogas and fertilizer, as well as the use of artificial intelligence in the field. • Covers a wide range of advanced and emerging treatment technologies such as photocatalysis processing, adsorptive membranes, pyrolysis, advanced oxidation process, electrocoagulation, composting technologies, etc. • Addresses issues associated with wastes in different phases. • Discusses the pros and cons of treatment technologies for handling different wastes produced by different industrial processes, such as agricultural biomass, industrial/domestic solid wastes, wastewater, and hazardous gas. • Includes application of artificial intelligence in treatment of electronic waste. This book will appeal to chemical, civil, and environmental engineers working on waste treatment, waste valorization, and pollution control.

The continued use of coal as a means of generating electricity and an increasing demand for cleaner, more efficient energy production has led to advances in power plant technology. Ultra-supercritical coal power plants reviews the engineering, operation, materials and performance of ultra-supercritical coal power plants. Following a chapter introducing advanced and ultra-supercritical coal power plants, part one goes on to explore the operating environments, materials and engineering of ultra-supercritical coal power plants. Chapters discuss the impacts of steam conditions on plant materials and operation, fuel considerations and burner design, and materials and design for boilers working under supercritical steam conditions. Chapters in part two focus on improving ultra-supercritical coal power plant performance and operability. Ash fouling, deposition and slagging in ultra-supercritical coal power plants are highlighted along with pollution control measures and the estimation, management and extension of the life of ultra-supercritical power plants. Further chapters provide an economic and engineering analysis of a 700°C advanced ultra-supercritical pulverised coal power plant and discuss CO2 capture-ready ultra-supercritical coal power plants. Ultra-supercritical coal power plants is a comprehensive technical reference for power plant operators and engineers, high-temperature materials scientists, professionals in the power industry who require an understanding of ultra-supercritical coal power plants and researchers and academics interested in the field. Provides a comprehensive reference on the developments, materials, design and operation of ultra-supercritical power plant Considers the degradation issues affecting this type of plant, as well as emissions control and CO2 capture technology; improved plant controls critical to improved operation and environmental performance Contains operational assessments for plant safety, plant life management, and plant economics

Concern over the effects of airborne pollution, green house gases, and the impact of global warming has become a worldwide issue that transcends international boundaries, politics, and social responsibility. The 2nd Edition of Coal Energy Systems: Clean Coal Technology describes a new generation of energy processes that sharply reduce air emissions and other pollutants from coal-burning power plants. Coal is the dirtiest of all fossil fuels. When burned, it produces emissions that contribute to global warming, create acid rain, and pollute water. With all of the interest and research surrounding nuclear energy, hydropower, and biofuels, many think that coal is finally on its way out. However, coal generates half of the electricity in the United States and throughout the world today. It will likely continue to do so as long as it's cheap and plentiful [Source: Energy Information Administration]. Coal provides stability in price and availability, will continue to be a major source of electricity generation, will be the major source of hydrogen for the coming hydrogen economy, and has the potential to become an important source of liquid fuels. Conservation and renewable/sustainable energy are important in the overall energy picture, but will play a lesser role in helping us satisfy our energy demands today. Dramatically updated to meet the needs of an ever changing energy market, Coal Energy Systems, 2nd Edition is a single source covering policy and the engineering involved in implementing that policy. The book addresses many coal-related subjects of interest ranging from the chemistry of coal and the future engineering anatomy of a coal fired plant to the cutting edge clean coal technologies being researched and utilized today. A 50% update over the first edition, this new book contains new chapters on processes such as CO2 capture and sequestration, Integrated Gasification Combined Cycle (IGCC) systems, Pulverized-Coal Power Plants and Carbon Emission Trading. Existing materials on worldwide coal distribution and quantities, technical and policy issues regarding the use of coal, technologies used and under development for utilizing coal to produce heat, electricity, and chemicals with low environmental impact, vision for utilizing coal well into the 21st century, and the security coal presents. Clean Liquids and Gaseous Fuels from Coal for Electric Power Integrated Gasification Combined Cycle (IGCC) systems Pulverized-Coal Power Plants Advanced Coal-Based Power Plants Fluidized-Bed Combustion Technology CO2 capture and sequestration