Guiding Principles For Sustainable Federal Buildings And Associated Instructions

In 2006, Federal agencies owning and operating more than 90% of all Federal facilities signed the Memorandum of Understanding for Federal Leadership in High Performance and Sustainable Buildings (2006 Guiding Principles). The Memorandum contained the first set of Guiding Principles - overarching environmental performance goals - for new Federal buildings. The 2006 Guiding Principles addressed reducing energy and water use, conserving resources, minimizing waste, protecting indoor air quality, and requiring the use of integrated teams during the design, construction, and operation of new Federal facilities. An updated set of Guiding Principles, called "High Performance and Sustainable Buildings Guidance," December 2008, contained "Guiding Principles for Sustainable New Construction and Major Renovation" and "Guiding Principles for Sustainable Existing Buildings." Previous Executive Orders (E.O.) 13423 (2006) and 13514 (2009) recognized green buildings as a key component in efforts to reduce environmental impacts, cut greenhouse gas (GHG) emissions, and lower the operating costs at Federal facilities. E.O. 13693, Planning for Federal Sustainability in the Next Decade, March 19, 2015, reaffirmed Federal green building efforts and called for revised Guiding Principles to reflect progress in green building design, construction, and operation practices; broaden considerations around protecting occupant health, wellness, and productivity; and address climate change risks.

Change 02, 7 June 2018 This UFC provides minimum requirements and guidance to achieve high performance and sustainable buildings that comply with the Energy Policy Act of 2005, the Energy Independence and Security Act of 2007, EO 13693, and the implementation requirements found in "Guiding Principles for Sustainable Federal Buildings and Associated Instructions" (HPSB Guiding Principles). This UFC is organized around the HPSB Guiding Principles. Per DOD Sustainable Buildings Policy, when a building meets the requirements of this UFC, it is considered compliant with the HPSB Guiding Principles. Includes a list of applicable NIST cybersecurity publications for consideration. Why buy a book you can download for free? First you gotta find it and make sure it's the latest version (not always easy). Then you gotta print it using a network printer you share with 100 other people - and its outta paper - and the toner is low (take out the toner cartridge, shake it, then put it back). If it's just 10 pages, no problem, but if it's a 250-page book, you will need to punch 3 holes in all those pages and put it in a 3-ring binder. Takes at least an hour. An engineer that's paid $75 an hour has to do this himself (who has assistant's anymore?). If you are paid more than $10 an hour and use an ink jet printer, buying this book will save you money. It's much more cost-effective to just order the latest version from Amazon.com This book is published by 4th Watch Books and includes copyright material. We publish compact, tightly-bound, full-size books (8 1⁄2 by 11 inches), with glossy covers. 4th Watch Books is a Service Disabled Veteran-Owned Small Business (SDVOSB). For more titles published by 4th Watch Books, please visit: cybah.webplus.net UFC 2-100-01 Installation Master Planning UFC 4-010-06 Cybersecurity of Facility-Related Control Systems UFC 4-021-02 Electronic Security Systems by Department of Defense FC 4-141-05N Navy and Marine Corps Industrial Control Systems Monitoring Stations UFC 4-010-01 DoD Minimum Antiterrorism Standards for Buildings UFC 4-020-01 DoD Security Engineering Facilities Planning Manual UFC 3-501-01 Electrical Engineering UFC 3-550-07 Operation and Maintenance (O&M) Exterior Power Distribution Systems UFC 3-550-01 Exterior Electrical Power Distribution UFC 3-560-01 Electrical Safety, O & M UFC 3-201-02 Landscape Architecture UFC 3-540-08 Utility-Scale Renewable Energy Systems UFC 3-440-01 Facility-Scale Renewable Energy Systems

Handbook of Green Building Design and Construction: LEED, BREEAM, and Green Globes, Second Edition directly addresses the needs of building professionals interested in the evolving principles, strategies, and concepts of green/sustainable design. Written in an easy to understand style, the book is updated to reflect new standards to LEED. In addition, readers will find sections that cover the new standards to BREEAM that involve new construction Infrastructure, data centers, warehouses, and existing buildings. Provides vital information and penetrating insights into three of the top Green Building Codes and Standards applied Internationally Includes the latest updates for complying with LEED v4 Practices and BREEAM Presents case studies that draws on over 35 years of personal experience from across the world

In the late 1990s, several of the sponsor agencies of the Federal Facilities Council began developing and implementing initiatives and policies related to sustainable development. Guidance related to life-cycle costing and value engineering was recognized as being supportive of sustainable development, in particular when used in the conceptual planning and design phases of acquisition, where decisions are made that substantially effect the ultimate performance of a building over its life cycle. However, specific concerns were raised that when federal agencies apply value engineering in the final stages of design or during construction in response to cost overruns, design features that support sustainable development may be eliminated. The primary objective of this study, therefore, was to develop a framework to show how federal agencies can use value engineering and life-cycle costing to support sustainable development for federal facilities and meet the objectives of Executive Order 13123.

The fundamental purpose of this handbook is to raise awareness about environmental impacts of fire and fire suppression, primarily within the fire engineering and firefighting communities, but also within the environmental engineering and planning disciplines. The Handbook provides readers with a fundamental understanding of the problem and its magnitude and includes a set of tools and methods for assessing environmental, social and financial impacts, and a set of tools for identifying and selecting appropriate mitigation options.

The design, construction, operation, and retrofit of buildings is evolving in response to ever-increasing knowledge about the impact of indoor environments on people and the impact of buildings on the environment. Research has shown that the quality of indoor environments can affect the health, safety, and productivity of the people who occupy them. Buildings are also resource intensive, accounting for 40 percent of primary energy use in the United States, 12 percent of water consumption, and 60 percent of all non-industrial waste. The processes for producing electricity at power plants and delivering it for use in buildings account for 40 percent of U.S. greenhouse gas emissions. The U.S. federal government manages approximately 429,000 buildings of many types with a total square footage of 3.34 billion worldwide, of which about 80 percent is owned space. More than 30 individual departments and agencies are responsible for managing these buildings. The characteristics of each agency's portfolio of facilities are determined by its mission and its programs. In 2010, GSA's Office of Federal High-Performance Green Buildings asked the National Academies to appoint an ad hoc committee of experts to conduct a public workshop and prepare a report that identified strategies and approaches for achieving a range of objectives associated with high-performance green federal buildings. Achieving High-Performance Federal Facilities identifies examples of important initiatives taking place and available resources. The report explores how these examples could be used to help make sustainability the preferred choice at all levels of decision making. Achieving High-Performance Federal Facilities can serve as a valuable guide federal agencies with differing missions, types of facilities, and operating procedures.

This UFC provides guidance for Department of Defense facilities to achieve high performance and sustainable building requirements in compliance with the Energy Policy Act of 2005, the Energy Independence and Security Act of 2007, EO 13423, EO 13514, and the Guiding Principles for Federal Leadership in High Performance and Sustainable Buildings (Guiding Principles).