Handbook Of Optical Engineering

This handbook explains principles, processes, methods, and procedures of optical engineering in a concise and practical way. It emphasizes fundamental approaches and provides useful formulas and step-by-step worked-out examples to demonstrate applications and clarify calculation methods. The book covers refractive, reflective, and diffractive optical components; lens optical devices; modern fringe pattern analysis; optical metrology; Fourier optics and optical image processing; electro-optical and acousto-optical devices; spatial and spectral filters; optical fibers and accessories; optical fabrication; and more. It includes over 2,000 tables, flow charts, graphs, schematics, drawings, photographs, and mathematical expressions.

Infused with more than 500 tables and figures, this reference clearly illustrates the intricacies of optical system design and evaluation and considers key aspects of component selection, optimization, and integration for the development of effective optical apparatus. The book provides a much-needed update on the vanguard in the field with vivid e

As we reach the data transmission limits of copper wire and communications experts seek to bring the speed of long-haul fiber optics networks closer to access points, optical interconnects promise to provide efficient, high-speed data transmission for the next generation of networks and systems. They offer higher bit-rates, virtually no crosstalk, lower demands on power requirements and thermal management, and the possibility of two-dimensional channel arrays for chip-to-chip communication. The Handbook of Optical Interconnects introduces the systems and devices that will bring the speed and quality of optical transmission closer to the circuit board. Contributed by active experts, most from leading technology companies in the US and Japan, this outstanding handbook details various low-cost and small-size configurations, illustrates the discussion with more than 300 figures, and offers a look at the applications and future of this exciting and rapidly growing field. The book includes a detailed introduction to vertical cavity surface-emitting lasers (VCSELs); the use of optical interconnects in metropolitan, local-area, and access networks through FTTP (FTTH); and Jisso technologies, which are critical for developing low-cost, small-size modules. Driving down the size and cost of optical interconnects is vital for integrating these technologies into the network and onto microprocessors, and the Handbook of Optical Interconnects provides the knowledge and tools necessary to accomplish these goals.

Good optical design is not in itself adequate for optimum performance of optical systems. The mechanical design of the optics and associated support structures is every bit as important as the optics themselves. Optomechanical engineering plays an increasingly important role in the success of new laser systems, space telescopes and instruments, biomedical and optical communication equipment, imaging entertainment systems, and more. This is the first handbook on the subject of optomechanical engineering, a subject that has become very important in the area of optics during the last decade. Covering all major aspects of optomechanical engineering - from conceptual design to fabrication and integration of complex optical systems - this handbook is comprehensive. The practical information within is ideal for optical and optomechanical engineers and scientists involved in the design, development and integration of modern optical systems for commercial, space, and military applications. Charts, tables, figures, and photos augment this already impressive handbook. The text consists of ten chapters, each authored by a world-renowned expert. This unique collaboration makes the Handbook a comprehensive source of cutting edge information and research in the important field of optomechanical engineering. Some of the current research trends that are covered include:

This handbook explains principles, processes, methods, and procedures of optical engineering in a concise and practical way. It emphasizes fundamental approaches and provides useful formulas and step-by-step worked-out examples to demonstrate applications and clarify calculation methods. The book covers refractive, reflective, and diffractive optical components; lens optical devices; modern fringe pattern analysis; optical metrology; Fourier optics and optical image processing; electro-optical and acousto-optical devices; spatial and spectral filters; optical fibers and accessories; optical fabrication; and more. It includes over 2,000 tables, flow charts, graphs, schematics, drawings, photographs, and mathematical expressions.

This handbook supplies analytical tools for the design and development of adaptive optics systems to enhance their ability to adjust for atmospheric turbulence, optical fabrication errors, thermally induced distortions, and laser device aberrations. It provides recommendations for selecting, testing and installing a wavefront compensation system.

A textbook on lasers and optical engineering should include all aspects of lasers and optics; however, this is a large undertaking. The objective of this book is to give an introduction to the subject on a level such that under graduate students (mostly juniors/seniors), from disciplines like electrical engineering, physics, and optical engineering, can use the book. To achieve this goal, a lot of basic background material, central to the subject, has been covered in optics and laser physics. Students with an elementary knowledge of freshman physics and with no formal courses in electromagnetic theory should be able to follow the book, although for some sections, knowledge of electromagnetic theory, the Fourier transform, and linear systems would be highly beneficial. There are excellent books on optics, laser physics, and optical engineering. Actually, most of my knowledge was acquired through these. However, when I started teaching an undergraduate course in 1974, under the same heading as the title of this book, I had to use four books to cover the material I thought an electrical engineer needed for his introduction to the world of lasers and optical engineering. In my sabbatical year, 1980-1981, I started writing class notes for my students, so that they could get through the course by possibly buying only one book. Eventually, these notes grew with the help of my undergraduate and graduate students, and the final result is this book.