High Temperature Oxidation And Corrosion Of Metals

High Temperature Oxidation and Corrosion of Metals, Second Edition, provides a high level understanding of the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry, and alloy composition. The book focuses on the design and selection of alloy compositions which provide optimal resistance to attack by corrosive gases, providing a rigorous treatment of the thermodynamics and kinetics underlying high temperature alloy corrosion. In addition, it emphasizes quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities, and alloy compositions. Users will find this book to be an indispensable source of information for researchers and students who are dealing with high temperature corrosion.

This book is concerned with providing a fundamental basis for understanding the alloy-gas oxidation and corrosion reactions observed in practice and in the laboratory. Starting with a review of the enabling thermodynamic and kinetic theory, it analyzes reacting systems of increasing complexity. It considers in turn corrosion of a pure metal by a single oxidant and by multi-oxidant gases, followed by corrosion of alloys producing a single oxide then multiple reaction products. The concept of “diffusion paths is used in describing the distribution of products in reacting systems, and diffusion data is used to predict reaction rates whenever possible. * Provides a logical and expert treatment of the subject for use as a guide for advanced-level academics, researchers and practitioners * Text is well supported by numerous micrographs, phase diagrams and tabulations of relevant thermodynamic and kinetic data * Combines physical chemistry and materials science methodologies

High Temperature Oxidation and Corrosion of Metals, Second Edition, provides a high level understanding of the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry, and alloy composition. The book focuses on the design and selection of alloy compositions which provide optimal resistance to attack by corrosive gases, providing a rigorous treatment of the thermodynamics and kinetics underlying high temperature alloy corrosion. In addition, it emphasizes quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities, and alloy compositions. Users will find this book to be an indispensable source of information for researchers and students who are dealing with high temperature corrosion. Emphasizes quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities, and alloy compositions Uses phase diagrams and diffusion paths to analyze and interpret scale structures and internal precipitation distributions Presents a detailed examination of corrosion in industrial gases (water vapor effects, carburization and metal dusting, sulphidation) Contains numerous micrographs, phase diagrams, and tabulations of relevant thermodynamic and kinetic data Combines physical chemistry and materials science methodologies Provides two completely new chapters (chapters 11 and 13), and numerous other updates throughout the text

A straightforward treatment describing the oxidation processes of metals and alloys at elevated temperatures. This 2006 second edition retains the fundamental theory but incorporates advances made in understanding degradation phenomena. The first half provides an authoritative introduction to the basic principles, covering thermodynamics and mechanisms of high temperature corrosion of metals and alloys. The latter half extends the discussion to oxidation processes in complex systems, from reactions in mixed environments to protective techniques, including coatings and atmosphere control. The authors provide a logical and expert treatment of the subject, producing a revised edition that will be a comprehensive guide to material scientists and engineers requiring an understanding of this elementary process.

High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings. Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials. This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. Describes the latest developments in understanding high temperature corrosion Presents the latest research by the leading innovators from around the globe Case studies are provided to illustrate key points

This text for graduate and post graduate students covers fundamentals of high temperature corrosion and related topics. Early chapters cover the thermodynamics and kinetics of oxidation and defect structure of oxides and diffusion in oxides, and later chapters cover thin and thick layer oxidation, o

This invaluable book reviews the state of the art of high temperature related problems pertaining to their utility, microstructure, mechanical properties, actual behavior in different environments, their protection by various kinds of coatings at high temperatures and a new concept of nanomaterials at high temperatures. The book begins with fundamentals of oxidation and corrosion. Various concepts relating to the modification or deterioration of mechanical properties when material is exposed to an aggressive environment compared to an inert environment or vacuum are also covered. Other chapters highlight the behavior of various advanced materials to high temperature conditions, an important high temperature effect called Active Element Effect, and many high temperature coatings and their behavior. Written by world-renowned authors in their own field, this book will be useful for professionals and academics in materials science and nanoscience. Contents:Fundamentals of High Temperature Oxidation/Corrosion (A S Khanna)Degradation of Mechanical Properties of Materials at High Temperatures in Corrosive Environments (A S Khanna)Materials Development Aiming at High Temperature Strengthening — Steels, Superalloys to ODS Alloys (Shigeharu Ukai)High Temperature Corrosion Problems in Re?neries, Chemical Process Industries and Petrochemical Plants (Pasi Kangas)High Temperature Corrosion Problems in Coal-based Thermal Power Plants (A S Khanna)High Temperature Corrosion Problems in Aircrafts (A S Khanna and Vinod S Agarwala)Coatings for High Temperature Applications (N I Jamnapara and S Mukherjee)Advanced Analytical Tools to Understand High Temperature Materials Degradation — Ion Beam Characterization of Aerospace Materials (Barbara Shollock and David McPhall)Role of Nanotechnology in Combating High Temperature Corrosion (R K Singh Raman, B V Mahesh and Prabhakar Singh)Reactive Element Additions in High Temperature Alloys and Coating (D Naumenko and W J Quadakkers) Readership: Researchers, academics, and professionals in surface science and new materials.

George Lai's 1990 book, High-Temperature Corrosion of Engineering Alloys, is recognized as authoritative and is frequently consulted and often cited by those in the industry. His new book, almost double in size with seven more chapters, addresses the new concerns, new technologies, and new materials available for those engaged in high-temperature applications. As we strive for energy efficiency, the realm of high-temperature environments is expanding and the need for information on high temperature materials applications was never greater. In addition to extensive expansion on most of the content of the original book, new topics include erosion and erosion-corrosion, low NOx combustion in coal-fired boilers, fluidized bed combustion, and the special demands of waste-to-energy boilers, waste incinerators, and black liquor recovery boilers in the pulp and paper industry. The corrosion induced by liquid metals is discussed and protection options are presented.