Multiresonator Based Chipless Rfid

This vital new resource offers engineers and researchers a window on important new technology that will supersede the barcode and is destined to change the face of logistics and product data handling. In the last two decades, radio-frequency identification has grown fast, with accelerated take-up of RFID into the mainstream through its adoption by key users such as Wal-Mart, K-Mart and the US Department of Defense. RFID has many potential applications due to its flexibility, capability to operate out of line of sight, and its high data-carrying capacity. Yet despite optimistic projections of a market worth $25 billion by 2018, potential users are concerned about costs and investment returns. Clearly demonstrating the need for a fully printable chipless RFID tag as well as a powerful and efficient reader to assimilate the tag’s data, this book moves on to describe both. Introducing the general concepts in the field including technical data, it then describes how a chipless RFID tag can be made using a planar disc-loaded monopole antenna and an asymmetrical coupled spiral multi-resonator. The tag encodes data via the “spectral signature” technique and is now in its third-generation version with an ultra-wide band (UWB) reader operating at between 5 and 10.7GHz.

In the era of information communication technology (ICT), radio frequency identification (RFID) has been going through tremendous development. RFID technology has the potential of replacing barcodes due to its large information carrying capacity, flexibility in operations, and applications. The deployment of RFID has been hindered by its cost. However, with the advent of low powered ICs, energy scavenging techniques, and low-cost chipless tags, RFID technology has achieved significant development. This book addresses the new reader architecture, presents fundamentals of chipless RFID systems, and covers protocols. It also presents proof-of-concept implementations with potential to replace trillions of barcodes per year. Overall, this resource aims to not only explain the technology, but to make the chipless RFID reader system a viable commercial product for mass deployment. It is certainly a very useful resource in the new field.

A systematic treatment of the design and fabrication of chipless RFID sensors This book presents various sensing techniques incorporated into chipless RFID systems. The book is divided into five main sections: Introduction to Chipless RFID Sensors; RFID Sensor Design; Smart Materials; Fabrication, Integration and Testing; and Applications of Chipless RFID Sensors. After a comprehensive review of conventional RFID sensors, the book presents various passive microwave circuit designs to achieve compact, high data density and highly sensitive tag sensors for a number of real-world ubiquitous sensing applications. The book reviews the application of smart materials for microwave sensing and provides an overview of various micro- and nano-fabrication techniques with the potential to be used in the development of chipless RFID sensors. The authors also explore a chipless RFID reader design capable of reading data ID and sensory information from the chipless RFID sensors presented in the book. The unique features of the book are: Evaluating new chipless RFID sensor design that allow non-invasive PD detection and localization, real-time environment monitoring, and temperature threshold detection and humidity Providing a classification of smart materials based on sensing physical parameters (i.e. humidity, temperature, pH, gas, strain, light, etc.) Discussing innovative micro- and nano-fabrication processes including printing suitable for chipless RFID sensors Presenting a detailed case study on various real-world applications including retail, pharmaceutical, logistics, power, and construction industries Chipless RFID Sensors is primarily written for researchers in the field of RF sensors but can serve as supplementary reading for graduate students and professors in electrical engineering and wireless communications.

A systematic treatment of the design and fabrication of chipless RFID sensors This book presents various sensing techniques incorporated into chipless RFID systems. The book is divided into five main sections: Introduction to Chipless RFID Sensors; RFID Sensor Design; Smart Materials; Fabrication, Integration and Testing; and Applications of Chipless RFID Sensors. After a comprehensive review of conventional RFID sensors, the book presents various passive microwave circuit designs to achieve compact, high data density and highly sensitive tag sensors for a number of real-world ubiquitous sensing applications. The book reviews the application of smart materials for microwave sensing and provides an overview of various micro- and nano-fabrication techniques with the potential to be used in the development of chipless RFID sensors. The authors also explore a chipless RFID reader design capable of reading data ID and sensory information from the chipless RFID sensors presented in the book. The unique features of the book are: Evaluating new chipless RFID sensor design that allow non-invasive PD detection and localization, real-time environment monitoring, and temperature threshold detection and humidity Providing a classification of smart materials based on sensing physical parameters (i.e. humidity, temperature, pH, gas, strain, light, etc.) Discussing innovative micro- and nano-fabrication processes including printing suitable for chipless RFID sensors Presenting a detailed case study on various real-world applications including retail, pharmaceutical, logistics, power, and construction industries Chipless RFID Sensors is primarily written for researchers in the field of RF sensors but can serve as supplementary reading for graduate students and professors in electrical engineering and wireless communications.

Introduces advanced high-capacity data encoding and throughput improvement techniques for fully printable multi-bit Chipless RFID tags and reader systems The book proposes new approaches to chipless RFID tag encoding and tag detection that supersede their predecessors in signal processing, tag design, and reader architectures. The text is divided into two main sections: the first section introduces the fundamentals of electromagnetic (EM) imaging at mm-wave band to enhance the content capacity of Chipless RFID systems. The EM Imaging through Synthetic Aperture Radar (SAR) technique is used for data extraction. The second section presents a few smart tag detection techniques for existing chipless RFID systems. A Multiple-Input and Multiple-Output (MIMO) based tag detection technique improves the spectral efficiency and increases data bit capacity. The book concludes with a discussion of how the MIMO approach can be combined with the image based technique to introduce a complete solution with a fast imaging approach to chipless RFID systems. The book has the following salient features: Discusses new approaches to chipless RFID tags such as EM imaging, high capacity data encoding, and robust tag detection techniques Presents techniques to enhance data content capacity of tags and reliable tag detection for the readers at unlicensed microwave and mm-wave 2.45, 24 and 60 GHz instrumentation, scientific and medical (ISM) frequency bands Includes case studies of real-world applications

Chipless RFID based on RF Encoding Particle: Realization, Coding and Reading System explores the field of chipless identification based on the RF Encoding Particle (REP). The book covers the possibility of collecting information remotely with RF waves (RFID) with totally passive tags without wire, batteries, and chips, and even printed on paper. Despite the many benefits of RFID, deployment is still hindered by several economic and technological factors. Among these barriers are the high cost of tags, lack of reliability and security in the information contained in the RFID chip, and how tags are 'recycled.' This book focuses on the development of chipless RFID tags, representing a new family of low cost tags. With this technology information is extracted from the electromagnetic response of the tag, which depends only on its geometry. Various solutions have been developed by the authors to increase the amount of information, reduce the surface of the tag, or improve the robustness of detection. Considerations such as realization using paper substrate, the development of a low cost detection system, and measurements in a real environment have been addressed for practical implementation. Introduces the chipless RFID REP approach as compared to classical chipless RFID, RFID, and barcode technologies Includes a demonstration of the practical and economic potential of chipless RFID technology, with detailed presentations and discussions of different test benches and comparisons Presents in detail numerous examples of chipless tags that are able to tackle specific problems: sensitivity of detection, encoding density, robustness of detection, problem of tag orientation, tags and reader cost, and compliance with emission standards Focuses on the development of chipless RFID tags, representing a new family of low cost tags

This book examines the design of chipless RFID systems. The authors begin with the philosophy of RFID and its effect on commercial applications. Then, they discuss the chipless RFID systems and the application of chipless RFID systems, the advantages it provides compared to conventional barcode ID and chipped RFID tags. The text then covers chipless RFID components in block diagram representation and introduce FCC requirements which should be considered in the design procedure of each component. The third chapter is dedicated to the complex natural resonance-based design of chipless RFID tags. The next chapter concerns about the detection techniques introduced for the identification of chipless RFID tags. The fifth chapter is dedicated to the localization and anti-collision techniques in chipless RFID systems. Final chapter is chipless RFID tags as sensors. It provides some applications where the tag can be used as both ID and sensor. The tag specifications and detection issues are addressed in this section.

Presents a comprehensive overview and analysis of the recent developments in signal processing for Chipless Radio Frequency Identification Systems This book presents the recent research results on Radio Frequency Identification (RFID) and provides smart signal processing methods for detection, signal integrity, multiple-access and localization, tracking, and collision avoidance in Chipless RFID systems. The book is divided into two sections: The first section discusses techniques for detection and denoising in Chipless RFID systems. These techniques include signal space representation, detection of frequency signatures using UWB impulse radio interrogation, time domain analysis, singularity expansion method for data extraction, and noise reduction and filtering techniques. The second section covers collision and error correction protocols, multi-tag identification through time-frequency analysis, FMCW radar based collision detection and multi-access for Chipless RFID tags as we as localization and tag tracking. Describes the use of UWB impulse radio interrogation to remotely estimate the frequency signature of Chipless RFID tags using the backscatter principle Reviews the collision problem in both chipped and Chipless RFID systems and summarizes the prevailing anti-collision algorithms to address the problem Proposes state-of-the-art multi-access and signal integrity protocols to improve the efficacy of the system in multiple tag reading scenarios Features an industry approach to the integration of various systems of the Chipless RFID reader-integration of physical layers, middleware, and enterprise software Chipless Radio Frequency Identification Reader Signal Processing is primarily written for researchers in the field of RF sensors but can serve as supplementary reading for graduate students and professors in electrical engineering and wireless communications.