Sampling And Surveying Radiological Environments

Private landowners or Federal Agencies responsible for cleaning up radiological environments are faced with the challenge of clearly defining the nature and extent of radiological contamination, implementing remedial alternatives, then statistically verifying that cleanup objectives have been met. Sampling and Surveying Radiological Environments pr

Private landowners or Federal Agencies responsible for cleaning up radiological environments are faced with the challenge of clearly defining the nature and extent of radiological contamination, implementing remedial alternatives, then statistically verifying that cleanup objectives have been met. Sampling and Surveying Radiological Environments provides the how-tos for designing and implementing cost effective and defensible sampling programs in radiological environments, such as those found in the vicinity of uranium mine sites, nuclear weapons production facilities, nuclear reactors, radioactive waste storage and disposal facilities, and nuclear accidents. It includes a CD-ROM that walks you through the EPA's Data Quality Objectives(DQO) procedures and provides electronic templates you can complete and print. Sampling and Surveying Radiological Environments addresses all of the major topics that will assist you in designing and implementing statistically defensible sampling programs in radiological environments, including: Summary of the major environmental laws and regulations that apply to radiological sites, and advice on regulatory interfacing · Internet addresses where you can find regulations pertaining to each States Theory of radiation detection and definitions of common radiological terminology Statistics and statistical software that apply to the environmental industry Details on commercially available radiological instrumentation and detection systems Building decontamination and decommissioning, radiological and chemical equipment decontamination procedures, and tank/drum/remote characterization Standard operating procedures for collecting environmental media samples Guidance on sample preparation, documentation, and shipment Guidance on data verification/validation, radiological data management, data quality assessment (DQA) · An electronic template to assist you in implementing the EPA's seven step DQO procedure and in the writing of a DQO Summary Report, and Sampling and Analysis Plan · Recommendations for developing a Sampling and Analysis Plan · Guidance on developing statistical sampling and survey designs Guidance on developing integrated sampling and survey designs Capabilities of various statistical sampling design software packages along with Internet addresses for web pages where statistical software can be downloaded at no cost to you Effectiveness of various scanning and direct measurement methods Sampling and Surveying Radiological Environments provides you with the most cost effective methods and technologies for sampling, characterizing, and remediating radiologically contaminated environments. It includes guidance on how to design programs using radiological screening technologies and statistical sampling approaches to meet the data quality objectives while minimizing cost.

Private landowners or Federal Agencies responsible for cleaning up radiological environments are faced with the challenge of clearly defining the nature and extent of radiological contamination, implementing remedial alternatives, then statistically verifying that cleanup objectives have been met. Sampling and Surveying Radiological Environments pr

Radiological Monitoring of the Environment documents the proceedings of a symposium organized by The Central Electricity Generating Board in association with The Joint Health Physics Committee, held at Berkeley, Gloucestershire, on 3-4 October 1963. Environmental monitoring in its different aspects is of interest to most health physicists, and in particular to those of the Generating Board in relation to nuclear power stations and nuclear laboratories. The symposium served the dual purpose of disseminating information on a subject of importance, and fulfilling one of the objectives of the Joint Health Physics Committee by bringing together people working in various fields. This volume is divided into two parts, following the way in which the symposium was arranged. The first part of the volume contains the papers and the second part consists of the transactions of the meeting at Berkeley. The papers presented cover topics such as radioactivity in agricultural products; the monitoring of artificial radioactivity in waters round the British Isles; the monitoring of uranium and plutonium dust hazards; radiological control in university laboratories; and environmental surveys around research reactors.

Originally published in 1994, the first edition of Field Sampling Methods for Remedial Investigations soon became a premier resource in this field. The "Princeton Groundwater" course designated it as one of the top books on the market that addresses strategies for groundwater characterization, groundwater well installation, well completion, and groundwater sampling. This long awaited third edition provides most current and most cost-effective environmental media characterization methods and approaches supporting all aspects of remediation activities. This book integrates recommendations from over one hundred of the most current US EPA, State EPA, US Geological Survey, US Army Corps of Engineers, and National Laboratory environmental guidance and/or technical documents. This book provides guidance, examples, and/or case studies for the following subjects: Implementing the EPA’s latest Data Quality Objectives process Developing cost effective statistical & non-statistical sampling designs supporting all aspects of environmental remediation activities, and available statistical sample design software Aerial photography, surface geophysics, airborne/surface/downhole/building radiological surveys, soil gas surveying, environmental media sampling, DNAPL screening, portable X-ray fluorescence measurements Direct push groundwater sampling, well installation, well development, well purging, no-purge/low-flow/standard groundwater sampling, depth-discrete ground sampling, groundwater modeling Tracer testing, slug testing, waste container and building material sampling, pipe surveying, defining background conditions Documentation, quality control sampling, data verification/validation, data quality assessment, decontamination, health & safety, management of investigation waste A recognized expert on this subject, author Mark Byrnes provides standard operating procedures and guidance on the proper implementation of these methods, focusing on proven technologies that are acknowledged by EPA and State regulatory agencies as reputable techniques.

The purpose of this book is to present a state of art summary of current knowledge of methods of assessment of radionuclides in the terrestrial and marine environments. It cover the traditional methods of radioactivity measurements such as radiometrics techniques, but also recent developments in the mass spectrometry sector. The book starts with a short preface introducing the subject of the book, summarising content and philosophy of the book, as well as the most important historical achievements. The scientific topics are introduced by description of sampling methods, optimisation of sampling sites and sampling frequency. The recent developments in radiochemical separation methods using chromatography resins for the treatment of actinides, transuranics and other groups of radioelements are also described. No other book is available covering all aspects of environmental radioactivity measurements, although remarkable progress has been made in detection techniques over the last ten years. At present the new methods enable to carry out investigations which were not possible before, either because of lack of sensitivity or because of the fact that they required too large samples.